How Much Does an LED Video Wall Cost in 2026?

The honest answer most installers won't give you: a residential LED video wall in 2026 lands between $1,200 and $3,500 per square foot installed, depending on pitch, brightness, and environment. Here's the full breakdown.

Indoor fine-pitch (P0.9 – P1.5)

$2,200–$3,500/sq ft installed. A 165" 16:9 wall (≈45 sq ft) lands $100K–$160K. Used for primary media rooms, golf simulators, and executive offices. Includes panels, processor, calibration, structural mount, and finish carpentry.

Indoor medium-pitch (P1.8 – P2.5)

$1,200–$2,000/sq ft installed. Ideal for foyers and great rooms where viewers sit 12+ feet away. A 220" foyer wall lands $90K–$150K.

Outdoor GOB/COB pool walls (P1.8 – P2.5)

$1,800–$2,800/sq ft installed. Built around weatherproof modules (IP65 front, IP65–68 rear), marine-grade mounting, and surge protection. A 165" pool wall typically lands $90K–$140K.

What's actually in the price

Panels are usually 45–55% of total. The remainder is the video processor (~$8K–$25K), structural steel mount, electrical service upgrade if needed, low-voltage trenching, network gear, calibration, and permit coordination. Skipping any of these is where cheap installs fail.

Lifecycle cost vs projector or commercial TV

A $90K LED wall amortized over its 100,000-hour useful life is roughly $0.90/hour. A $30K laser projector with $4K lamp swaps every 20,000 hours runs $1.70/hour over the same lifetime — and degrades visibly throughout.

How to get an accurate number

Square-foot estimates are a starting point only. The real quote depends on your viewing distance (drives pitch), ambient light (drives brightness), and site access (drives labor). We provide a fixed-price quote after a free on-site survey.